新疆地区夏季平流层低层风场特征分析及数值模拟     

王晓婷  李森  史小康  黄江平  胡艳冰 《气象科技》2021,49(6):878-884

利用2017年6—8月的FNL再分析资料分析了新疆地区夏季平流层低层风场的时空演变特征，开展了平流层低层风场的高分辨率数值模拟和检验。结果表明：新疆地区夏季平流层纬向风随时间的变化存在经向差异，同时准零风层开始和结束的时间也存在经向差异，准零风层开始时间南部地区早于北部地区，而准零风层结束时间则相反。整个夏季新疆地区上空的准零风层处于70～40 hPa之间，其高度随时间呈先降低而后升高的变化趋势。准零风层数值模拟结果表明，模拟的准零风层参数与探空资料分析结果相比二者存在一致的变化趋势，准零风层起始高度的平均绝对误差为467 m，该高度对应的风速均方根误差为1.75 m/s。  相似文献   

高原大地形及海洋热力强迫对东亚及北半球环流和气候变化影响的观测研究     

罗会邦  陈蓉 《气象科学》1995,15(4):17-29

本文总结了“青藏高原大地形及西太平洋暖池势力强迫对东亚及全球气候变化的影响”专题五年来的主要研究工作。其中包括青世故高原东部大气热源的时间演变特征,夏半年高原热源异常对我国降水和北半球环流的影响;西沙海温变化特征及其与我南方降水的关系,北太平洋海温主因子特征及其与华南前汛期降水的变化。  相似文献   

井下记录的PP和SS震相     

乌统昱  赵惠君 《地震地磁观测与研究》1992,13(2):20-26

本文在系统分析静海台井下地震记录图的基础上,发现并解决了具有一定实际和理论意义的两个问题:其一是证明了最初误认为是干扰的“双脉冲”图形实际上均是微地震。从而指出研究静海周围地区的地震活动性应考虑微震活动问题。其二确认静海周围地区微震波形的4个主要震相是P、PP、S和SS,并对地面反射波PP和SS能够观测到的条件作了初步分析,其结果进一步说明井下地震记录较之地面记录更为“逼真”,复杂和丰富。  相似文献   

短周期仪器记录在远震分析中的应用     

许康生 《地震地磁观测与研究》1992,13(2):15-19

地震泼由多种频率成份组成,在其传播过程中。由于地球介质的滤波作用,随着传播距离的增大。高频成份逐渐被衰减。周期越大的成份传播越远。因此,在地震观测上,不同频带的地震仪用于观测不同震中距范围的地震,使仪器较好地响应,就我国台网而言,短周期仪用于地方震、近震的监测,中长周期仪和长周期仪用于远震,极远震的监测,其中长周期仪偏重于记录极远震。但作者在实际分析工作中注意到,短周期仪的记录应用于远震,极远震的分析,显示出独特的作用,充分挖掘和利用短仪资料,将会更加丰富远震、极远震的震相资料。本文以高台地震台的资料为依据,从震中距和震级角度,与中长仪和长仪作比较,对短仪记录远震、极远震的震相及特征作了统计分析与初步探讨,并对新疆地区“影区”地震S波的记录、日本地区地震_PPcP等震相的出现提出了现象的存在,给出了相应的观测结果,以待步一步研究。  相似文献   

A surface complexation model for cadmium and lead adsorption onto diatom surface     

A. Glabert  O.S. Pokrovsky  C. Reguant  J. Schott  A. Boudou 《Journal of Geochemical Exploration》2006,88(1-3):110

This work is devoted to the physico-chemical study of cadmium and lead interaction with diatom–water interfaces for two marine planktonic (Thalassiosira weissflogii = TW, Skeletonema costatum = SC) and two freshwater periphytic species (Achnanthidium minutissimum = AMIN, Navicula minima = NMIN) by combining adsorption measurements with surface complexation modeling. Reversible adsorption experiments were performed at 20 °C after 3 h of exposure as a function of pH, metal concentration in solution, and ionic strength. While the shape of pH-dependent adsorption edge is similar among all four diatom species, the constant-pH adsorption isotherm and maximal binding capacities differ. These observations allowed us to construct a surface complexation model for cadmium and lead binding by diatom surfaces that postulates the constant capacitance of the electric double layer and considers Cd and Pb complexation with mainly carboxylic and, partially, silanol groups. Parameters of this model are in agreement with previous acid–base titration results and allow quantitative reproduction of all adsorption experiments.  相似文献   

Investigation of the effect of aggregate shape and surface roughness on the slake durability index using the fractal dimension approach     

Ersin Kolay  Kamil Kayabali   《Engineering Geology》2006,86(4):271-284

Argillaceous rocks cover about one thirds of the earth's surface. The major engineering problems encountered with weak- to medium-strength argillaceous rocks could be slaking, erosion, slope stability, settlement, and reduction in strength. One of the key properties for classifying and determining the behavior of such rocks is the slake durability. The concept of slake durability index (SDI) has been the subject of numerous researches in which a number of factors affecting the numerical value of SDI were investigated. In this regard, this paper approaches the matter by evaluating the effects of overall shape and surface roughness of the testing material on the outcome of slake durability indices.

For the purpose, different types of rocks (marl, clayey limestone, tuff, sandstone, weathered granite) were broken into chunks and were intentionally shaped as angular, subangular, and rounded and tested for slake durability. Before testing the aggregate pieces of each rock type, their surface roughness was determined by using the fractal dimension. Despite the variation of final values of SDI test results (values of I_d), the rounded aggregate groups plot relatively in a narrow range, but a greater scatter was obtained for the angular and subangular aggregate groups. The best results can be obtained when using the well rounded samples having the lowest fractal values. An attempt was made to analytically link the surface roughness with the I_d parameter and an empirical relationship was proposed. A chart for various fractal values of surface roughness to use as a guide for slake durability tests is also proposed. The method proposed herein becomes efficient when well rounded aggregates are not available. In such condition, the approximate fractal value for the surface roughness profile of the testing aggregates could be obtained from the proposed chart and be plugged into the empirical relation to obtain the corrected I_d value. The results presented herein represent the particular rock types used in this study and care should be taken when applying these methods to different type of rocks.  相似文献   

Threshold velocity for wind erosion: the effects of porous fences   总被引：3，自引：0，他引：3  

Zhibao Dong  Guangqiang Qian  Wanyin Luo  Hongtao Wang 《Environmental Geology》2006,51(3):471-475

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.  相似文献   

基于模糊综合评判的动态路径行程时间预测模型   总被引：3，自引：0，他引：3  

张文胜  殷倩  吴立新  徐磊  臧志刚 《地理与地理信息科学》2006,22(4):25-28

针对城市交通路网的复杂性和不确定性,提出一种基于模糊综合评判的动态行程时间预测模型,将总行程时间分为行驶时间和交通延误时间两部分,分别介绍这两部分时间的预测模型,并利用该模型对一组模拟道路信息和路况信息进行实际预测,对预测结果进行比较和分析。研究表明该模型算法简捷实用,预测结果精度较高。  相似文献   

Glacial survival of blockfields on the Varanger Peninsula, northern Norway     

Jakob Fjellanger  Leif Srbel  Henriette Linge  Edward J. Brook  Grant M. Raisbeck  Franoise Yiou 《Geomorphology》2006,82(3-4):255-272

For more than hundred years it has been debated whether blockfields in mountain summit areas can be used to delimit the vertical extent of Pleistocene ice sheets. In this study the relationship between blockfields, developed in quartzites and sandstones on the Varanger Peninsula, northern Norway, and glacially derived features have been evaluated. Erratics and circular ablation moraines are superimposed on the blockfields and lateral meltwater channels are eroded into them. Glacial striations and other signs of glacial sculpturing are restricted to low-lying areas with channelled ice flow. Relative ages of the blockfields and the features in them are inferred, and the first measurements of in-situ produced cosmogenic nuclides from the Varanger Peninsula are reported. We conclude that the blockfields have survived underneath at least one thick, cold-based ice sheet. Thus, these blockfields cannot be used as indicators of ice-free conditions as previously suggested for southern Norway. Our results have implications for the potential for land surface preservation beneath ice sheets and for glacial reconstructions in northern Fennoscandia.  相似文献   

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update     

Scott W. White 《Natural Resources Research》2006,15(4):271-281

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.  相似文献